July 04, 2020, 02:39:14 AM
Forum Rules: Read This Before Posting

Topic: Centrifuge design equations  (Read 864 times)

0 Members and 1 Guest are viewing this topic.

Offline Help123

  • New Member
  • **
  • Posts: 3
  • Mole Snacks: +0/-0
Centrifuge design equations
« on: March 02, 2019, 12:47:08 PM »
I need to design a centrifuge, i'm separating a solid from a mixture of liquids. I already have the flow rate (Q), volume (v). I need to size the equipment, to find:
the height,
the thickness of the wall.
Also, i don't know what other parts the centrifuge has which need to be designed..i would appreciate any help.

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7377
  • Mole Snacks: +516/-86
  • Gender: Male
Re: Centrifuge design equations
« Reply #1 on: March 03, 2019, 08:54:48 AM »
Search internet, Wikipedia, library...
This is not a problem that can be solved in a few minutes.
ttps://www.researchgate.net/publication/307593327_Design_and_Development_of_an_Industrial_Centrifuge_for_Small_and_Medium_Scaled_Industries - can be downloaded
an so on.

Offline Enthalpy

  • Chemist
  • Sr. Member
  • *
  • Posts: 3485
  • Mole Snacks: +287/-57
Re: Centrifuge design equations
« Reply #2 on: March 04, 2019, 09:09:25 AM »
[...] what other parts the centrifuge has which need to be designed [...]
Quite a few! This depends very much on the density difference and grain size of the solid. What azimuthal velocity did you determine? At 100m/s everything is easy, at 300m/s it's difficult, at 400m/s extremely difficult.

The bearings must be chosen, with possible imbalance in mind, and if no ball or hydrodynamic bearings fit the task, you may need aerodynamic or magnetic bearings, whose market availability is limited and may demand a special design. That alone would be a heavy task with unexpected worries.

In case you need to rotate in vacuum because of aerodynamic losses, you must acquire, let design or design yourself a vacuum chamber.

Depending on the engine you need, it may not be available commercially, or need a tailor design by a manufacturer, or you have to design it. Same story for its drive electronics.

Expect questions and possible difficulties with governmental agencies, depending on the materials needed, especially for centrifuges. Maraging steel and some aluminium alloy tubes cross borders with difficulties because of uranium enrichment, but the much more efficient graphite fibres aren't controlled.

Sponsored Links