March 28, 2024, 07:29:03 AM
Forum Rules: Read This Before Posting


Topic: Calculate amount of acid needed in a solution to lower pH  (Read 2304 times)

0 Members and 1 Guest are viewing this topic.

Offline seerrah_

  • New Member
  • **
  • Posts: 4
  • Mole Snacks: +0/-0
Calculate amount of acid needed in a solution to lower pH
« on: April 12, 2019, 03:54:48 PM »
Hi,

I can't figure out the following problem..

When a 30mM (aq) solution of sodium acetate was prepared in the lab, it had a pH of 8.8. Calculate the amount of acetic acid (in grammes) to be added to 0.5L of this sodium acetate solution in order to bring the pH to the target value of 5.00.

Any help would be greatly appreciated!!

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7981
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Calculate amount of acid needed in a solution to lower pH
« Reply #1 on: April 12, 2019, 05:18:50 PM »
Addition of acetic acid forms a buffer solution. Amount of the acetic acid is so small that you can safely neglect the volume change in calculations.
AWK

Offline seerrah_

  • New Member
  • **
  • Posts: 4
  • Mole Snacks: +0/-0
Re: Calculate amount of acid needed in a solution to lower pH
« Reply #2 on: April 13, 2019, 05:19:27 AM »
I’m still none the wiser if anyone could help?

Offline AWK

  • Retired Staff
  • Sr. Member
  • *
  • Posts: 7981
  • Mole Snacks: +555/-93
  • Gender: Male
Re: Calculate amount of acid needed in a solution to lower pH
« Reply #3 on: April 13, 2019, 08:54:54 AM »
Calculate the ratio of acid to salt concentration from pH 5.0 (using the Henderson-Hasselbach equation). Then scale the problem down from 1 L to 0.5 L and calculate the mass of acetic acid. It is a really simple problem.
AWK

Sponsored Links