March 28, 2024, 11:30:53 AM
Forum Rules: Read This Before Posting


Topic: Volume of Silo bin with Cone top  (Read 2457 times)

0 Members and 1 Guest are viewing this topic.

Offline zeshkani_usa

  • Regular Member
  • ***
  • Posts: 13
  • Mole Snacks: +0/-1
Volume of Silo bin with Cone top
« on: February 02, 2013, 07:53:11 PM »
To calculate the volume of the contents you use the formula for a cone, as long as the height of the product, h, is less than or equal to the height of the conical section, hcone.
V=1/3πrh2h   if h ≤ hcone
and rh is the radius at height h:   rh=tan∅   if rh ≤ R.

If the height of the stored product is greater than the height of the conical section, the equation for a cylinder must be added to the volume of the cone:
V=1/3∏r2hcone+∏r2(h-hcone) if h > hcone.
If the height of the conical section is 3.0 m, the radius of the cylindrical section is 2.0 m, and the total height of the storage bin is 10.0 m, what is the maximum volume of material that can be stored?

here is what i did. I found the volume of the cone since it says we are given a conical height of 3 and the radius of 2 so i get a volume of about 12m3 and I get the cylinidrical volume by just V=∏r2h since were are given the total height of the bin at 10m so the cylinder must be 7m tall since (10-3hcone=7) and the volume of the cylinder is about 87m3 so the total volume is them combined to give me a total volume of around V=100m3

is this right?

Sponsored Links